Справочник Пользователя для Panasonic AJ-D850P
– 67 –
USER menu
<TAPE PROTECT>
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
400
STILL
0000
0.5s
TIMER
0001
5s
0002
10s
0003
20s
0004
30s
0005
40s
0006
50s
0007
1min
0008
2min
401
SRC
0000
STEP
PROTECT
0001
HALF
402
DRUM
0000
OFF
STDBY
0001
ON
403
STOP
0000
STEP
PROTECT
0001
HALF
The underline on the setting item denotes the initial setting.
<Note>
In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be
set for automatic tape protection mode in 30 seconds or under.
In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be
set for automatic tape protection mode in 30 seconds or under.
This selects the time to be taken until the unit goes into the
tape protection mode when it is left standing in the stop or
search still (JOG/VAR/SHTL) mode. (Unit: s = second, min =
minute)
<Note>
With the DV or DVCAM format, the maximum time which can
be set is 10 s even when a setting above 10 s has been
selected. The selection screen, however, will operate for up to
2 minutes.
tape protection mode when it is left standing in the stop or
search still (JOG/VAR/SHTL) mode. (Unit: s = second, min =
minute)
<Note>
With the DV or DVCAM format, the maximum time which can
be set is 10 s even when a setting above 10 s has been
selected. The selection screen, however, will operate for up to
2 minutes.
This selects the operation during the tape protection mode
when the unit is left standing in the still status during the
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the HALF LOADING mode when the total time for which the
unit is left standing in the still status reaches 30 minutes
(DVCPRO) or 1 minute (DV or DVCAM).
when the unit is left standing in the still status during the
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into
the HALF LOADING mode when the total time for which the
unit is left standing in the still status reaches 30 minutes
(DVCPRO) or 1 minute (DV or DVCAM).
This selects the drum operation in the STANDBY OFF mode.
0: The drum stops rotating.
1: The drum continues rotating.
0: The drum stops rotating.
1: The drum continues rotating.
This selects the operation in the tape protection mode when
the unit has been left standing in the STOP mode.
0: STEP FWD
1: HALF LOADING
<Note>
When STEP FWD is selected, the unit is automatically
transferred to the HALF LOADING mode when the total time
during which it has been left standing in the STOP mode
reaches 30 minutes (or 1 minute with a DV/DVCAM tape).
the unit has been left standing in the STOP mode.
0: STEP FWD
1: HALF LOADING
<Note>
When STEP FWD is selected, the unit is automatically
transferred to the HALF LOADING mode when the total time
during which it has been left standing in the STOP mode
reaches 30 minutes (or 1 minute with a DV/DVCAM tape).
<TIME CODE>
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
500
VITC
0000
10L
POS-1
0001
11L
0002
12L
0003
13L
0004
14L
0005
15L
0006
16L
0007
17L
0008
18L
0009
19L
0010
20L
The underline on the setting item denotes the initial setting.
This sets the position where the VITC signal is to be inserted.
(The same line as for VITC POS-2 in 501 cannot be selected.)
(The same line as for VITC POS-2 in 501 cannot be selected.)