Справочник Пользователя для Pelco TLR3096

Pelco Manual C672M (2/01)

29

Refer to the 

Programming for Alarm Recording

 section for programming instructions for the

following fields.

Sets the alarm recording mode.

•

If TAPE LENGTH in the First Time Set Up menu is set
to T-120, the display switches in the following order
when you turn the JOG dial: 6H, L18H, L30H, 8H.

•

If set to T-160, the display switches in the following
order when you turn the JOG dial: 8H, L24H, L40H, 8H.

Sets the length of the alarm recording period. When you turn
the JOG dial, the display switches in the following order: 1M
(minute), 2M, 5M, 10M, MAN1, MAN2, 15S (second), 30S,
45S, 1M.

Sets the emergency recording mode, as follows:

•

ON – Starts alarm recording when the alarm signal is
received (ALM IN terminal grounded), not only during
recording but also when the power is off, when the tape
is stopped, or when the VCR is in standby mode for
timer recording.

•

OFF – Starts alarm recording when the alarm signal is
received (ALM IN terminal grounded) during recording.

Sets super resolution mode, as follows:

•

ON – Recording and playback happen at more than
400 lines of resolution.

•

OFF – Recording and playback happen at VHS mode.

Sets the number of recorded fields in one-shot recording
mode. When you turn the JOG dial, the displays switches in
the following order: 1, 2, 3, 4, 5, 10, 20, 30, 1.

Sets the time interval in one-shot recording mode. When you
turn the JOG dial the display switches in the following order:
SHOT, 10S (second), 15S, 30S, 45S, 1M (minute), 2M, 3M,
SHOT.

00394

<RECORDING SET UP>
 ALARM REC MODE 

8H

 ALARM REC DURATION 

1M

 EMERGENCY REC 

OFF

 SUPER RESOLUTION

ON

 ONE SHOT •FIELD

1

 ONE SHOT •INTERVAL 

SHOT

Figure 18.  Recording Set

Up Menu

 When using the

MX4000 Series Genex Mul-
tiplexer: set ALARM REC
DURATION to MAN2, and
make sure EMERGENCY
REC is set ON if the VCR is
to record alarms only.