Справочник Пользователя для Pelco TLR3096

Pelco Manual C672M (2/01)

69

The VCR uses self-diagnostics to detect internal malfunctions during recording. If one
occurs, the VCR indicates it on the fluorescent display and/or on the monitor. Table J shows
the type of malfunction corresponding to the warning display and the action to take.

Table J.  Warning Display and Actions

End

TAPE END

Tape ends

Rewind tape or

Rewind tape or

during recording.

press EJECT.

 press EJECT.

noSIg

NO SIGNAL

No video signal

Check for loose

Restore video

input during

connections.

signal or clear

recording.

recording mode.

(display

CHECK

Tape or deck

Check cassette. If nothing is wrong,

starts

trouble during

try recording again. If “CHECK” still

flashing)

recording.

appears, insert a new cassette and
retry recording. If “CHECK” stays on,
unplug the power cord and contact
the dealer.

•

When the tape reaches its end during recording, “End” appears on the fluorescent
display and “TAPE END” appears on the monitor. They will not appear if TAPE END in
the First Time Set Up menu is set to REPEAT, ALARM•PROT (when no alarm
recording is made), or REWIND.

•

“NO SIGNAL” appears on the monitor and “noSIg” flashes on the fluorescent display
when the VCR cannot get any video signal input during recording. Check that the
cable from the camera is not broken and the camera has power.