Справочник Пользователя для Pelco TLR3096
72
Pelco Manual C672M (2/01)
SPECIFICATIONS
ELECTRICAL
Power Source:
Power Source:
100-230 VAC (± 10%), 50/60 Hz (the included power cord is used
for 120 VAC, 60 Hz)
for 120 VAC, 60 Hz)
Power Consumption:
Approximately 18 watts
VIDEO AND AUDIO
Tape Format:
Tape Format:
VHS, 1/2-inch width, high-density, video cassette tape
Television System:
EIA standard 525 lines, 60 fields, NTSC-type color system
Video Recording
System:
System:
Four rotary heads
Luminance Signal:
Frequency modulation recording
Color Signal:
Low frequency conversion, subcarrier phase shift recording
Audio Track:
One track
Tape Speed and
Recording Time:
Recording Time:
Refer to Table K
Fast Forward/Rewind
Time:
Time:
Approximately 120 seconds with T-120 tape
Horizontal Resolution:
More than 400 lines (super resolution mode)
More than 240 lines (VHS mode)
More than 240 lines (VHS mode)
Audio Frequency
Response:
Response:
70 Hz – 7 kHz (6H mode)
Signal-to-Noise Ratio:
Video: Better than 42 dB
Audio: Better than 43 dB
Audio: Better than 43 dB
Video Input:
1.0 Vp-p, 75 ohms, BNC plug
Audio Input:
308 mV (rms), 50k ohms, RCA plug
Microphone Input:
0.346 mV (rms), 600 ohms, mini jack
Output:
Video: 1.0 Vp-p, 75 ohms, BNC plug
Audio: 388 mV (rms), 1k ohms, RCA plug
Audio: 388 mV (rms), 1k ohms, RCA plug
Battery Backup:
Lasts 31 days
MECHANICAL
Heads
Heads
Video:
Four rotary heads
Audio/Control:
One stationary head
Erase:
One full-track head
Motors:
Three direct drive (drum, capstan)
Connectors
ALM Input:
Screw terminal for starting alarm recording
RST Input:
Screw terminal for finishing alarm recording or for adjusting on-
screen clock
screen clock
REC Input:
Screw terminal for starting/finishing recording or for series
recording
recording
GND:
Screw terminal for ground
ALM Output:
Screw terminal for output while alarm recording is underway
CLK Output:
Screw terminal to command camera switching
MODE Output:
Screw terminal for indicating the VCR’s selected mode
CALL Output:
Screw terminal for external warning device or for series recording
REMOTE Jack:
Jack for connecting the remote control circuit
RS-232C Interface:
DB9
GENERAL
Operating Temperature: 41° to 104°F (5° to 40°C)
Relative Humidity:
Operating Temperature: 41° to 104°F (5° to 40°C)
Relative Humidity:
Maximum 80%
Dimensions
(JOG Dial Included)
(JOG Dial Included)
16.7 (W) x 12.4 (D) x 3.7 (H) inches (42.5 x 3.14 x 9.5 cm)
Weight:
9 lb (4.2 kg)
Weight and dimensions shown are approximate.
(Design and product specifications subject to change without notice.)