Справочник Пользователя для RCA VR508

VCR MAIN MENU

1 TIMER RECORDINGS

The line input refers to the signal coming from the 

AUDIO1

and

VIDEO1 IN

jacks of the VCR.  Recording from the line input is

convenient if you have a satellite receiver or similar component
attached to these jacks.

To timer record from the component connected to the VCRÕs line
input, press 

INPUT or “0,0” 

on the remote to enter 

VIDEO 

in the

channel number position.

1.

Press

MENU

on the remote to display the 

VCR MAIN MENU

.

2.

Press

1 

to display the

TIMER RECORDINGS 

menu. 

3.

Press

2 

to display the programÕs menu. 

4.

Press

MENU 

for next program or 

CLEAR

to erase the

program.

To prevent recording short passages of unwanted material, use 

PAUSE 

during recording to

stop and start recording. The VCR automatically switches from pause to stop after a few
minutes.

This feature is useful to tamper proof your timer recordings from unwanted changes and/or
protect the VCR from misoperation by other users in the household. It also prohibits all
operations of the VCR once the feature is turned on.

Press and hold 

POWER

on the remote for approximately six

seconds to turn on the  Pro-Tect Plusª feature.

The 

TIMER

and 

RECORD

indicators on the front panel flash to

let you know the feature is activated. After the feature is turned
on, momentarily pressing 

POWER

also causes the indicators to

flash.

Press and hold 

POWER

on the remote for approximately six

seconds to unlock the VCR. The VCR turns on.

PROGRAM 1  (ONE TIME)

CHANNEL     VIDEO
START TIME  --:-- --
END TIME    --:-- --
START DATE  --/--/--
TAPE SPEED  SLP

PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT

TIMER RECORDINGS

1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.

PROGRAM 1   (ONE TIME)

CHANNEL     08  
START TIME  02:10 PM
END TIME    03:35 PM
START DATE  08/04/96 SUN
TAPE SPEED  SLP

PRESS CLEAR TO ERASE
PRESS MENU FOR NEXT PROG