Справочник Пользователя для RCA 15530130

Receives signals from another

component, such as a VCR or camcorder, when connected through these jacks. to record from
these jacks, use the  INPUT button on the remote control to select L2.

Selects next higher or lower channel in the VCR’s channel

memory. When a tape is playing, these buttons adjust tracking. Press both buttons at the same
time to recenter tracking.

Forwards the tape when the VCR is stopped. Searches the picture forward during

playback. Starts slow motion during play-pause and increases slow-motion speed.

Toggles between the VCR’s video input channel and regular antenna/satellite

connections. To view the broadcast from an external device (such as a camcorder) connected
to the VCR’s audio/video jacks, tune to the VCR’s Video Line Input.

Plays a tape. Pauses action for viewing during playback. Pauses recording to

prevent recording of unwanted scenes.

Turns the VCR on or off. The power button glows at all times, even when the VCR is

turned off.

Starts VCR recording. Also used for Express Recording (XPR).

Receives signals from the remote control. Aim the remote at this sensor.

Rewinds the tape when the VCR is stopped. Searches the picture in reverse during

playback. Starts slow motion during play-pause and decreases slow-motion speed.

Stops normal VCR functions such as record, playback, rewind, fast-forward, and

pause. Ejects the tape when the VCR is stopped.

Selects a recording speed (either SP or SLP).

Switches the picture signal so that it either comes from the VCR or the cable/

antenna system.

POWER

TAPE SPEED

INPUT

TV•VCR

VIDEO

INPUT

LEFTMONO

RIGHT

VIDEO

PLAY

PAUSE

REV

FWD

STOP•EJECT

RECORD

CHANNEL

TRACKING