Справочник Пользователя для Panasonic AJ-HD1400P

41

*1 Displayed menus may vary depending on the settings in

menu No. 25 SYSTEM FREQ. For details, refer to
“Menus which are displayed” (page 32).

“_____” indicates the factory setting.

For setting whether to restrict the operation of the 
EJECT button on the front panel.
0000

Operation is inhibited while the unit is in the 
recording mode.

The EJECT button can be operated in all operation
modes.

For selecting whether to enable or disable recording 
on a tape which has been recorded using a format 
other than DVCPRO HD-LP.
0000

Recording onto the cassette tape is enabled.

Recording onto the cassette tape is disabled.

For selecting whether or not to perform simultaneous 
playback during normal recording (Other than the 
frame-by-frame shooting).
0000

The output for simultaneous playback during 
normal recoding is switched in accordance with the 
menu item No.140 OUTPUT.
EE:

EE output

TAPE: Simultaneous playback output

Simultaneous playback during normal recoding is 
performed at all times, regardless of the setting of 
the menu item No.140 OUTPUT.

For selecting the alarm sound for condensation, 
termination of the tape (remaining time of about 2 
minutes) or running out of battery power.
0000

The alarm sound is not activated.

The alarm sound is activated.

<Note>
If "ON" is selected in menu item No. 152 HUMID 
OPE, the alarm sound for condensation is not 
activated even if "ON" is selected.

For selecting the output signals.
0000

<In the STOP mode>:
The input signals selected by the setting of the 
INPUT SELECT button are output.
<During recording or editing>:
The input signals selected by the setting of the 
INPUT SELECT button are output:

<In the STOP mode>
The signals played back from the tape are output.
<During recording or editing>:
The simultaneous playback signals are output.

<Note>
In order to select the output signals during recording 
or editing, set menu item No.119 CONFI REC or 
No.302 CONFI EDIT.

For setting the unit’s operation when condensation 
has formed.
0000

The unit does not operate when condensation has 
formed.

It operates even when condensation has formed 
but no guarantees are made that the operation will 
be trouble-free.

<Note>
Since operating the unit when condensation has 
formed may damage the tape or give rise to other 
trouble, the “OFF” setting is recommended under 
normal circumstances.

For setting how the follow-on recording function is to 
be used.
(For setting the AUTO BACK function operation which 
rewinds the tape for several seconds in order to 
ensure that the video images follow on one from 
another with no disruptions.)
0000

The tape is not rewound automatically (no AUTO 
BACK).

The tape is rewound (AUTO BACK) during REC 
PAUSE, and it then stops in the recording standby 
status. (When PAUSE is released, the tape runs 
up, and recording starts.)

In addition to the function of the 0001 REC-P 
setting, the tape is rewound (AUTO BACK) during 
REC PLAY, the tape immediately runs up, and 
recording starts.