Справочник Пользователя для Sony SLV-SE800I
54
Setting the timer manually
To stop recording
To stop the VCR while recording, press x STOP.
Daily/weekly recording
In step 2 above, press
m to select the recording pattern. Each time you press m, the
indication changes as shown below. Press
M to change the indication in reverse
order.
TODAY
t
SUN-SAT (Sunday to Saturday)
t
MON-SAT (Monday to Saturday)
t
MON-FRI (Monday to Friday)
t
SAT (every Saturday) .....
t
MON (every
Monday)
t
SUN (every Sunday)
t
1 month later
t
(dates count down)
t
TOMORROW
t
TODAY
Tips
• To set the programme position, you can also use the PROG +/– or programme number
buttons.
• To set the programme position with a two digit number, press - (ten’s digit) button followed
by the programme number buttons.
• To set the line input video source, you can also use the PROG +/– buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape becomes
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to the LP mode.
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1
menu (page 73).
Note that some interference will appear on the picture at the point the tape speed is changed.
If you want to keep the same tape speed, set AUTO LONG PLAY to OFF in the OPTIONS-1
menu (page 73).
• Even if you set TIMER OPTIONS to VIDEO Plus+ in the OPTIONS-2 menu, you can set the
timer manually. Press MENU to select TIMER, then go to step 2.
• To check, change, or cancel the programme setting, press
</, to choose LIST, then press
OK in step 2. For details, see step 3 in “Checking/changing/cancelling timer settings” (page
62).
62).
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times exactly as
indicated in the TV programme guide. Otherwise, the VPS/PDC function won’t work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
• The
indicator flashes in the display window when you press ?/1 with no tape inserted.
• The VPS/PDC function is automatically set to OFF for the timer recording of a programme
from your set top box.
• The station name may not appear if the VCR does not receive station name information
signals.