Справочник Пользователя для Sony SLV-998HF

Your VCR includes a cable box control
feature that allows the VCR to control
most brands of cable boxes / DSS
receivers via the CABLE Mouse.  With
cable box control, the VCR controls
channels on the cable box / DSS receiver
for timer recording.  You can also use the
VCR's remote commander to change
channels on the cable box / DSS receiver
whenever the cable box / DSS receiver is
turned on even if the VCR is turned off.
To use the cable box control, you need to
connect the Cable Mouse (pages 11 and
24) and set the code number and output
channel.

This VCR is programmed with codes necessary to control channel
selection on most brands of cable boxes at the time this VCR was
manufactured.  It is possible that new cable boxes may be introduced
that cannot be controlled with this VCR's Cable Mouse.  If you have a
cable box that is incompatible with this VCR, contact your cable
operator - they may be able to provide you with a compatible cable
box.

CABLE BOX CONTROL

Press MENU, then press CURSOR           to
move the cursor to CABLE BOX

CABLE MOUSE

ON

OFF

CONTROL and press OK.

When using the EASY SET UP procedure,
skip this step.

Use                     to     select

Push      MENU     to     quit

Press CURSOR                 to select ON, then

CABLE BOX CONTROL

press CURSOR     .

CABLE MOUSE

ON

OFF

BOX CODE NO.

 -- -- --

BOX OUTPUT CH

CH3

Enter    your    CABLE BOX

Code No.    Using    0  -  9    keys

Refer    to    the    Operating

Manual    for    the    Code

Getting started