Справочник Пользователя для Sony RDR-VX511

Changes the command mode of this recorder if 
other DVD equipment is assigned the same 
command mode. Be sure to match the 
COMMAND MODE switch on the remote to the 
setting made here. For details, see “If you have a 
Sony DVD player or more than one Sony DVD 
recorder” on page 24.

Allows you to return the setup settings to their 
default settings. Note that all of your previous 
settings will be lost.

After step 3 above, select “Factory Setting,” 
and press ENTER.

Select “Start,” and press ENTER.
The setup settings return to their default 
settings.

Press ENTER when "Finish" appears.
The power automatically turns off and then on 
again, and the recorder is reset to the factory 
settings.
When the “Easy Setup” display appears, 
follow the instructions for Easy Setup 
(page 22) from step 4.

Select this to run the Easy Setup program.

Follow the instructions for Easy Setup 
(page 22) from step 5.

DVD 1

Select this if the default 
command mode conflicts 
with other DVD equipment.

DVD 2

Select this if the default 
command mode conflicts 
with other DVD equipment.

DVD 3

The default command mode 
of the recorder.

Follow the guide to make initial settings.

Before you start, 

check that you have made all necessary connections.

Start

Cancel