Справочник Пользователя для Sony M25AE

Chapter 1

Overview

25

Cha

p

ter 1

O

v

e

rv

ie

w

Time counter screen 
To display the time counter on the LCD monitor, press 
the DISPLAY button. On the time counter screen, the 
time data (count value of the counter/time code/user 
bits) is displayed. 
While the time counter is displayed, the position of the 
time counter can be moved up and down by pressing the 
J/j buttons. When the small size time counter is 
displayed, the position of the time counter can be moved 
not only up and down, but also to the left and right by 
pressing the 

K/k buttons. 

When the count value of the counter is negative, “–” 
appears as the first digit (leftmost digit). When that 
value is positive, the first digit is blank. When the 
format of the displayed time code is the drop frame 
mode, the drop frame indicator is displayed as a period 
between the minutes and seconds (i.e., 00:12.58:00).
When user bits are displayed, the space between hour, 
minute, and second is blank.

•  In the playback mode, if the tape has a portion where 

recorded signals are not continuous: 
– The count value of the counter may not advance 

correctly from that portion.

– The displayed value of the time code or user bits may 

be temporarily inaccurate.

• When the unit plays back a part of the tape where the 

recorded systems of 60i (including 24p and 30p) and 
50i (including 25p) are mixed, the displayed value of 
the counter may be inaccurate.

• When the unit plays back a part of the tape where the 

recording format has been changed among HDV, 
DVCAM and DV, the displayed value may be 
inaccurate. 

• The counter operates on a ±12-hour cycle. You cannot 

make the counter operate on a 24-hour cycle. 

• The count value of the counter consists of seven digits. 

The tens place of the “hour” is not displayed. (i.e., If 
the actual count value is “11:22:11:22”, the displayed 
value will be “1:22:11:22.”) However, the unit 
recognizes that the hours value is “11.” 

Setting the time counter 
You can adjust the settings of the time counter display 
in [COUNTER SET] in the [DISPLAY SET] menu. 

DISPLAY : Selects whether to display the time 

counter or not. 

SIZE : Selects the size of the time counter. 
COLOR : Selects the color of the time counter. 

To display the STATUS CHECK screen, press the 
STATUS CHECK button.
Each time you press the 

J/j button, the STATUS 

CHECK screen switches in the order of AUDIO, 
OUTPUT, ASSIGN, and CUSTOM REPEAT.
To hide the STATUS CHECK screen, press the 
STATUS CHECK button again.
While an HVR-DR60 or an HVR-MRC1 is connected 
using the  HDV/DV jack, the device information can 
be displayed using the 

J/j buttons of the unit.

Audio level meter and audio setting screen
The audio setting screen is displayed when the STATUS 
CHECK screen is set to [AUDIO]. This screen displays 
the audio level meter and the setting values of [AUDIO 
MONI] in the [AUDIO SET] menu.

Audio level meter
The audio level meter can be used to confirm and adjust 
the audio level.
The audio level meter is displayed in different patterns, 
depending on the audio mode and the AUDIO OUTPUT 
SELECT switch.

The unit detects the audio mode as follows:

In the playback mode: Detects the audio mode 
recorded on the tape.
In the recording/EE mode: Detects the selected 
audio mode in [AUDIO MODE] of the [AUDIO 
SET] menu.
When the INPUT SELECT switch is set to HDV/
DV and HDV or DV signals are being input: 
Detects the audio mode of the signals being input. 
(When i.LINK signals are input, the setting of 
[AUDIO MODE] in the [AUDIO SET] menu 
cannot be changed.)

00:10:26:12