Справочник Пользователя для Sony M25AE

Chapter 2

Playback and Recording

47

Cha

p

te

r 2

P

la

yba

c

k

 an

d Re

cor
di

n

g

• If you connect the output connectors of the unit to the 

input connectors of the player, a humming noise may 
be generated or the image may be distorted. If these 
phenomena occur, set the INPUT SELECT switch to a 
position where a signal is not currently being input, or 
disconnect the cables. 

• Distorted signals (i.e., when played back at a speed 

other than normal) may not be recorded or may be 
distorted. 

• When you connect only AUDIO IN jacks when the 

HDV indicator is lit, no audio is input. You must 
connect the VIDEO IN jack at the same time or set 
[HDV/DV SEL] in the [IN/OUT REC] menu to [DV].

When you record an HDV (1080/60i, 1080/24p, 1080/
30p, 1080/50i, 1080/25p), DVCAM, or DV format 
i.LINK signal, the video and audio signals are sent 
without any degradation in quality, enabling high-
quality recording. The signal flow is automatically 
detected so you do not need to make separate 
connections for input and output. 

• When you record video from HDV-compatible 

equipment, set [HDV/DV SEL] in the [IN/OUT REC] 
menu to [AUTO]. To record video from DVCAM/DV 
equipment, set [HDV/DV SEL] in the [IN/OUT REC] 
menu to [AUTO] or [DV] before connecting the 
i.LINK cable (page 70). If you change the setting after 
connecting the i.LINK cable, the video equipment may 
not recognize the video signals correctly. 

• Copy-protected programs such as digital broadcasts 

can not be input via the   HDV/DV jack. 

• With an HDV/DV connection, the sound is recorded in 

the same audio recording mode as that of the source 
tape. To record in a different audio recording mode 
from that of the source tape, connect the equipment as 
shown in “To video equipment without an i.LINK 
jack” on page 46. 

Monitor

HVR-M25A (rear panel)

To i.LINK jack

i.LINK cable (not supplied)

Digital video equipment 
with an i.LINK jack

Monitor

: Signal flow