Справочник Пользователя для Sony M25AE

Chapter 2

Playback and Recording

51

Cha

p

te

r 2

P

la

yba

c

k

 an

d Re

cor
di

n

g

By connecting the unit to an external AC timer (not 
supplied), you can start recording at a preset time.
Make sure that the POWER switch on the rear panel of 
the unit is in the “|” (ON) position beforehand.

Connect the unit to an external AC timer (not 
supplied).

Insert a tape for recording.

Set the INPUT SELECT switch of the unit to select 
the input signals.

Set the TIMER switch on the front panel of the unit 
to REC.

Set the timer-on time on the connected AC timer.

At the preset time, the power of the unit turns on 
automatically and recording starts after a few to 
several tens of seconds. Set the timer allowing a 
margin for the recording to start. You do not need to 
press the REC button.

To turn the unit off, press the STOP button on the unit 
to stop the tape transport operation beforehand. If you 
turn the unit off while a tape is running, for example, by 
using an AC timer, the unit or the tape may be damaged.

If the tape ends before the recording source 
stops operation
The tape stops.

To stop recording during timer recording
Press the STOP button on the unit.

To release the AC timer recording mode
Set the TIMER switch on the front panel of the unit to 
OFF.

HVR-M25A (rear panel)

VIDEO INPUT jack

AC timer

To an AC outlet

Recording source 
(external tuner, etc.)