Справочник Пользователя для Sony MPEG4 Video Recorder

This chapter describes the preliminary steps required to set up the 
recorder and how to make connections before starting to use the 
device.

Follow these instructions to insert the remote control battery:

1. Push in the clip at the side of the battery 

holder.

2. Pull battery holder out.

3. Insert the battery as shown, while noting 

the correct polarity.

4. Push battery holder and snap it in place.

MPEG-4 Video Recorder_UM_EN.book  Page 7  Thursday, June 22, 2006  2:14 PM