Справочник Пользователя для Sony MPEG4 Video Recorder

Скачать
Страница из 54
48
Figure 1 Main Page
Note: Depending on your region, you may need to change TV out-
put from NTSC to PAL at this point.  This is done by accessing the 
settings menu (figure 2 below) and changing the TV Output mode.
(4) Upgrade the firmware
Unzip and Save new firmware file to CF/Memory stick card via a 
CF/Memory stick card reader. The vcr4800.bin file should be 
saved directly to directory and not in any folder.
Insert CF/Memory Stick card into the MPEG-4 recorder.
Scroll to the Setup mode by pressing right arrows on the remote 
controller. Setup mode shows as the figure 2.
Figure 2 Setup Menu
Press “Enter” on the remote controller entering the Setup menu. 
Scroll through the Setup menu to the second page. The current 
firmware version like v.1.03.44 will show underneath the Factory 
Reset. 
Use the up arrow to scroll to the Firmware Upgrade. 
When the Firmware Upgrade is highlighted, press “Enter” on the 
remote controller to start the firmware upgrade. 
A “Clock” icon will pop up and remains for seconds.
MPEG-4 Video Recorder_UM_EN.book  Page 48  Thursday, June 22, 2006  2:14 PM