Справочник Пользователя для Sony PCS-G70/G70P

3

Enter the IP address assigned to the PCS-G70/G70P in the address line of your browser.
The format of an address is:
http://XXX.XXX.XXX.XXX/

For instance, if the IP address is “192.47.100.117”, enter “http://192.47.100.117/” in the address line.

Note
When a proxy server in an external network segment has been set, the Gateway address in the PCS-G70/
G70P LAN setting must also be set. Or set your Web browser proxy setting to “No Proxy” for the PCS-
G70/G70P.

Once you reach the Web page, the following window will be displayed asking you to identify yourself as
the user.

Enter one of the following user names (see below) into the “User Name” box and the corresponding
password into the “Password” box, then click the [OK] button.
Each character of a password is shown as “*” on the screen. When the user name and password are correct,
the “Dial/Disconnect” page will come up. If an incorrect user name or password is entered three times, an
error message appears on the screen.

• When you enter “user” in the “User Name” box and then its password (Remote Access Password) in the

“Password” box, you can access and check the “Phone Book” and “Setup” pages.

• When you enter “super” in the “User Name” box and then its password (Phone Book Modification

Password) in the “Password” box, you can access the “Phone Book” page, change the setting of the page,
and register a new entry onto the page. And you can check the “Setup” page.

• When you enter “sonypcs” in the “User Name” box and then its password (Administrator Password) in

the “Password” box, you can access the “Phone Book” page, change the setting of the page, and register a
new entry onto the page. And you can check and modify the “Setup” page.

• If the corresponding password is not assigned, leave the “Password” box blank and click the [OK] button.
• Administrator Setup Password, Phone Book Modification Password and Remote Access Password

settings are in the Administrator Setup menu.