Справочник Пользователя для Sony MSW-M2100
Chapter 2
Location and Function of Parts
2-14
Chapter 2
Location and Function of Parts
1
REF. (reference) VIDEO INPUT connectors
(BNC type) and 75
Ω termination switch
Input a reference video signal. Input a video signal
with chroma burst (VBS) or a monochrome video
signal (VS). When using the loop-through connection
set the switch to the OFF position, and otherwise to the
ON position.
with chroma burst (VBS) or a monochrome video
signal (VS). When using the loop-through connection
set the switch to the OFF position, and otherwise to the
ON position.
2
COMPONENT VIDEO OUTPUT connectors
(BNC type)
These connectors output analog component video
signals (Y/R–Y/B–Y).
These connectors output analog component video
signals (Y/R–Y/B–Y).
3
COMPOSITE VIDEO OUTPUT connectors
(BNC type)
These connectors output analog composite video
signals.
When the setting of F4 (CHARA) in function menu
page 4 is ON, connector 3 (SUPER) outputs a signal
with superimposed time code, menu settings, alarm
messages, and other text information.
These connectors output analog composite video
signals.
When the setting of F4 (CHARA) in function menu
page 4 is ON, connector 3 (SUPER) outputs a signal
with superimposed time code, menu settings, alarm
messages, and other text information.
3 Digital audio output section
AUDIO OUTPUT (AES/EBU) connectors (BNC
type)
These connectors output up to four sets (8 channels:
channels 1/2, 3/4, 5/6 and 7/8) of AES/EBU format
digital audio signals.
type)
These connectors output up to four sets (8 channels:
channels 1/2, 3/4, 5/6 and 7/8) of AES/EBU format
digital audio signals.
4 Digital signal output section
1
SDTI-CP (Serial Data Transport Interface)
OUTPUT connectors (BNC type)
Output SDTI-CP format video and audio signals.
Output SDTI-CP format video and audio signals.
2
SDI (Serial Digital Interface) OUTPUT
connectors (BNC type)
These connectors output D1 format digital video/audio
signals.
When the setting of F4 (CHARA) in function menu
page 4 is ON, connector 3 (SUPER) outputs a signal
with superimposed time code, menu settings, alarm
messages, and other text information.
These connectors output D1 format digital video/audio
signals.
When the setting of F4 (CHARA) in function menu
page 4 is ON, connector 3 (SUPER) outputs a signal
with superimposed time code, menu settings, alarm
messages, and other text information.
5 Power supply section
1
AC IN connector
Use the optional power cord to connect this to an AC
outlet.
outlet.
2
Ground terminal
Connect this to ground.
AUDIO OUTPUT(AES/EBU)
CH1/2
CH3/4
CH5/6
CH7/8
AUDIO OUTPUT (AES/EBU) connectors
2-2 Connector Panel
SDI
OUTPUT
OUTPUT
1
2
3(SUPER)
SDTI-CP
1
2
1
SDTI-CP OUTPUT connectors
2
SDI OUTPUT connectors
1
AC IN connector
2
Ground terminal