Справочник Пользователя для Sony SLV-SE230G/I

71

Troubleshooting

The PDC function does 
not operate properly.

• Check that the clock and the date are set correctly.
• Check that the PDC time you set is the correct one (there 

might be a mistake in the TV programme guide).  If the 
broadcast you wanted to record did not send the good PDC 
information, the VCR will not start recording.

• If the reception is poor, the PDC signal might be altered 

and the VCR might not start recording.

A tape cannot be 
inserted.

• Check that a tape is not already in the tape compartment.

The remote commander 
does not function.

• Make sure you are pointing the remote commander at the 

remote sensor on the VCR.

• Replace all the batteries in the remote commander with 

new ones if they are weak.

• Make sure the [TV] / [VIDEO] remote control switch is set 

correctly.

The selected input line 
connector number does 
not appear in the display 
window.

• Press INPUT SELECT to display the connected line.

The tracking meter does 
not appear on the TV 
screen.

• The recording condition of the tape is very poor and 

tracking cannot be adjusted.

You cannot control other 
TVs.

• Set your TV’s code number.  The code number may change 

when you replace the batteries of the remote commander.

The display window 
becomes dim.

• The display window automatically becomes dim when the 

VCR is in standby or timer recording mode.

The VCR needs to be 
cleaned.

• Clean the cabinet, panel and controls with a dry, soft cloth, 

or a soft cloth slightly moistened with a mild detergent 
solution.  Do not use any type of solvent, such as alcohol or 
benzine.

The Line Through 
function does not 
operate.

• Set POWER SAVE in the USER SET menu to OFF (see