Справочник Пользователя для Sony M25AP
26
Chapter 1
Overview
Ch
ap
te
ap
te
r 1
O
v
e
rv
ie
w
Displaying Various Data
Audio mode: 48 kHz (2-channel, 16 bits)
(The levels of two channels, channels 1 and 2, are displayed.)
Audio mode: 32 kHz (4-channel, 12 bits)
(a) When the AUDIO OUTPUT SELECT switch is
set to CH-1/2 or CH-3/4
set to CH-1/2 or CH-3/4
(The levels of four channels, channels 1 to 4, are displayed.
During playback, if the sounds are recorded onto channels 3
and 4, their level meters fluctuate. However, during normal
recording, you cannot record sounds onto the channels 3 and
4 on the unit.)
During playback, if the sounds are recorded onto channels 3
and 4, their level meters fluctuate. However, during normal
recording, you cannot record sounds onto the channels 3 and
4 on the unit.)
(b) When the AUDIO OUTPUT SELECT switch is
set to MIX
set to MIX
(The mixed level of channels 1 and 3 is displayed on CH1/3;
that of channels 2 and 4 is displayed on CH2/4. The audio
output level becomes 50% (–6 dB) of the original audio
levels.)
that of channels 2 and 4 is displayed on CH2/4. The audio
output level becomes 50% (–6 dB) of the original audio
levels.)
(c) When the unit is in the audio dubbing mode and
the AUDIO OUTPUT SELECT switch is set to CH-
1/2 or CH-3/4
the AUDIO OUTPUT SELECT switch is set to CH-
1/2 or CH-3/4
(The levels of playback sound are displayed on CH1 and
CH2. The levels of input sound to be dubbed are displayed on
CH3 and CH4. When AUDIO OUTPUT SELECT switch is
set to MIX, the mixed level of the pair of channels 1 and 3 and
that of channels 2 and 4 are displayed. The audio output level
becomes 50% (–6 dB) of the original audio levels on each
channel. In this case, the meters are as illustrated in (b) on this
page. To check only the sound to be dubbed before dubbing,
press the AUDIO DUB button while the unit is in the stop
mode. The level meters fluctuate only when the channels
(channel 3 and 4) are selected for audio dubbing.)
CH2. The levels of input sound to be dubbed are displayed on
CH3 and CH4. When AUDIO OUTPUT SELECT switch is
set to MIX, the mixed level of the pair of channels 1 and 3 and
that of channels 2 and 4 are displayed. The audio output level
becomes 50% (–6 dB) of the original audio levels on each
channel. In this case, the meters are as illustrated in (b) on this
page. To check only the sound to be dubbed before dubbing,
press the AUDIO DUB button while the unit is in the stop
mode. The level meters fluctuate only when the channels
(channel 3 and 4) are selected for audio dubbing.)
In EE, recording, or audio dubbing (only the channels
used to dub) mode, if the input levels exceed 0 dB,
portions of the meters turn red. (However, when the
audio mode is set to 32 kHz (4-channel,12 bits), whereas
the AUDIO OUTPUT SELECT switch is set to MIX,
the mixed audio levels that exceed 0 dB do not turn red.)
During playback or while HDV/DV signals are input,
the levels meters do not turn red.
used to dub) mode, if the input levels exceed 0 dB,
portions of the meters turn red. (However, when the
audio mode is set to 32 kHz (4-channel,12 bits), whereas
the AUDIO OUTPUT SELECT switch is set to MIX,
the mixed audio levels that exceed 0 dB do not turn red.)
During playback or while HDV/DV signals are input,
the levels meters do not turn red.
OUTPUT screen
The OUTPUT screen is displayed when STATUS
CHECK screen is set to [OUTPUT].
You can confirm the following setting values:
The OUTPUT screen is displayed when STATUS
CHECK screen is set to [OUTPUT].
You can confirm the following setting values:
– [HDV/DV SEL] in the [IN/OUT REC] menu
– [HDMI/CMPNT], [DOWN CONVERT] of [VIDEO
– [HDMI/CMPNT], [DOWN CONVERT] of [VIDEO
OUT] in the [IN/OUT REC] menu
– [HDV
t DV CONV], [DOWN CONVERT] of
[i.LINK SET] in the [IN/OUT REC] menu
For details on OUTPUT settings, see “IN/OUT REC menu”
on page 70.
on page 70.
1/4
AUDIO MONI: CH1, CH2
Note
OUTPUT
2/4
HDV/DV SEL :
AUTO
VIDEO OUT
HDMI/CMPNT: 1080i / 480i
DOWN CONVERT: SQUEEZE
i.LINK SET
HDV DV CONV: OFF
DOWN CONVERT: SQUEEZE
[
STATUS
CHECK
]
:
END