Справочник Пользователя для Sony SVT-LC300

18

         <POWER  FAILURE>

                     <DEW>

002  FAILURE
        RECOVERY

001  FAILURE
        RECOVERY

12-20
12-20

12-10
12-20

07:15
07:30

11:00
12:00

If a power interruption occurs, The P indicator lights in
the display window and if a moisture condensation
occurs, the “dddd” indicator flashes. Even if a power
interruption or moisture condensation occurs while
recording, the internal batteries provide backup power
for memory for at least 30 days. The internal batteries
can be charged in about 48 hours.
If the power is interrupted during recording, the
recording starts automatically after power is restored.

Press MENU until POWER FAILURE/DEW display
appears.
This shows a count of the power interruption and
moisture condensation and the period when the
recording was interrupted.

Connect another SVT-LC300 for series recording (for
details on connection, see page 9) and set each of the
units as follows.

SERIES REC on

Y

Y

Y

SET UP 3 screen

TAPE END OUT on

–3M

–3M

–3M

SET UP 3 screen

Cassette tape

Loaded

Loaded

Loaded

Operating status

Recording Turned off Turned off

REPEAT REC

Off

Off

Off

Security lock

Locked

Locked

Locked

Timer recording

Off

Off

Off

When all of the settings are complete, set unit #1 in
recording mode and turn off the power of unit #2 and
subsequent unit.
When recording on unit #1 is complete, the power for
unit #2 turn on and recording begins (The recording
cannot be done for about 11 seconds.).
The unit #1 rewinds its tape and turns off.

When a T-120 or T-160 tape is used and TAPE END
OUT is set to –3M, the unit #2 starts recording before
the unit #1 stops so that recording is continued without
stop.

Count of power interruption

No recording
periods

Count of moisture condensation

MENU