Справочник Пользователя для Sony SVT-LC300

Скачать
Страница из 120
28
Setting the Alarm Recording Mode
1
Press MENU until the SET UP 3 display appears
on the screen.
Y1 of ALARM MODE is flashing.
2
Set ALARM MODE to Y1, Y2, Y3 or N by
pressing DATA ‘/’.
Y1 (yes): always accepts alarms.
Y2: accepts alarms only when  timer recording is
proceeding.
Y3: accepts alarms only in timer recording standby
mode.
N (no): does not accept alarm even if an alarm
signal is received.
3
Press PAUSE/SEARCH to return to the normal
display.
Alarm Recording
Notes
• While alarm recording is in progress, other modes are
inoperable.
• After the alarm recording is completed, the VCR
returns to the condition it was in before the alarm
signal was received.
• If an alarm input is received while the VCR is in
repeat recording (see page 17), repeat recording stops
and the REPEAT REC indicator goes off. After the
tape reaches the end, the tape is rewound and the
VCR stops. The OFF indicator lights in the display
window (only when R1 is selected for TAPE END
MODE in the SET UP 3 display).
• When the OFF indicator lights, in order to prevent
accidental erasure of a recorded tape, timer recording
and alarm recording cannot be executed.
If any of REC r, FF ), REW 0, PLAY z is
pressed, the OFF indicator goes off and operation for
which you have pressed the button proceeds.
• If another alarm is received while alarm recording is
in progress, the second alarm recording starts and the
recording duration is extended.
• If the power is interrupted while alarm recording is in
progress and restored again, the operation before the
alarm recording was made resumes.
              <SET  UP  3>
ALARM  MODE
ALARM  SPEED
ALARM  DURATION
TAPE  IN  MODE
TAPE  END  MODE
TAPE  END  OUT
CLOG  DETECT.
SERIES REC
Y1
6H
20S
STOP
REW
-3M
Y
N
6
Set  in which mode the alarm recording begins by
pressing DATA ‘/’.
Y (yes): accepts alarms only in recording mode.
When the VCR is in seriers recording (see page
18), set to Y.
N (no): accepts alarm in recording mode, stop
mode or power off mode.
7
Press PAUSE/SEARCH to return to the normal
display.
              <SET  UP  3>
ALARM  MODE
ALARM  SPEED
ALARM  DURATION
EXT  TIME  ADJ.
TAPE  IN  MODE
TAPE  END  MODE
TAPE  END  OUT
CLOG  DETECT.
SERIES REC
Y1
6H
20S
01:00
STOP
REW
-3M
Y
N