Справочник Пользователя для Sony SLV-SE740D/E

79

Troubleshooting

The VPS/PDC function 
does not operate 
properly.

• Check that the clock and the date are set correctly.
• Check that the VPS/PDC time you set is the correct one 

(there might be a mistake in the TV programme guide).  If 
the broadcast you wanted to record did not send the good 
VPS/PDC information, the VCR will not start recording.

• If the reception is poor, the VPS/PDC signal might be 

altered and the VCR might not start recording.

The SYNCHRO REC 
button turns off while 
recording or does not go 
back to recording 
standby mode.

• The tape has reached its end.  Insert a new tape and press 

SYNCHRO REC again.

The Synchronized 
Recording function does 
not work.

• The connected equipment was not turned off.

Turn off the connected equipment and press SYNCHRO 
REC again.

• There was a power failure.  Press SYNCHRO REC again.

The programme recorded 
with the Synchronized 
Recording function is 
incomplete.

• If the settings for timer recordings and Synchronized 

Recording overlap, the programme that starts first has 
priority and the second programme starts recording only 
after the first programme has finished.

• There was a power failure.  Press SYNCHRO REC again.

You cannot watch PAY-
TV/Canal Plus 
programmes when the 
VCR is in standby mode.

• Check that DEC is set to ON for this channel in the TV 

STATION TABLE menu.

• Make sure the PAY-TV/Canal Plus Scart cable is plugged 

securely.

A PAY-TV/Canal Plus 
programme is always 
recorded scrambled.

• Make sure the PAY-TV/Canal Plus Scart cable is plugged 

securely.

• Check that DEC is set to ON for this channel in the TV 

STATION TABLE menu.