Справочник Пользователя для Sony DSR-25

Chapter 1

Overview

9

 (GB)

Chapter 1   Overview

1

Insert a standard-size or mini-size DVCAM cassette.
To open or close the compartment, press the EJECT
button qa.

2

Turning on this switch disables all of buttons to
prevent accidental button operations.

• In addition to the Remote Commander supplied with

the unit, the unit accepts signals from any Sony
Remote Commander whose command mode is set to
VTR4. If you want to disable the control from any
Remote Commander, set COMMANDER on the
OTHERS menu to CONTROL S.

• The TIMER selector 4 setting has a higher priority

than this switch setting.

• When this switch is set to ON, the ON/STANDBY

switch 3 does not work. To enable the ON/
STANDBY switch, set this switch to OFF.

3

Press this switch to turn the unit on. The ON/
STANDBY lamp lights up in green. When you press
this switch again, the unit goes into the standby mode
and the lamp lights up in red.

When the KEY INH switch is set to ON, this switch
does not work. To enable this switch, set the KEY INH
switch to OFF.

4

Use to select Auto Repeat or recording using an
external AC timer (not supplied).

REPEAT: Whenever the power is connected to this

unit, a tape rewinds to its beginning automatically
and playback starts. The unit repeats the playback
from the beginning to the first index (if there is no
index on the tape, to an unrecorded portion; if there
is no unrecorded portion, to the end of the tape).
Auto Repeat also functions if you set this selector
to REPEAT during playback or rewinding.

1

2

3

4

7

8

0

1

1

2

5

9

6

3

4

qa