Справочник Пользователя для OKI MC860n MFP

Getting started > 20

Your unit will handle a variety of print media, including a range of paper weights and sizes, 

transparencies and envelopes. This section provides general advice on choice of media, and 

explains how to use each type.
The best performance will be obtained when using standard 20 to 24 lb. US Bond (75 to 90 

g/m²) paper designed for use in copiers and laser printers. Use of heavily embossed or very 

rough textured paper is not recommended.
Pre-printed stationery can be used, but the ink must not offset when exposed to the high 

fuser temperatures used in the printing process.
Envelopes should be free from twist, curl or other deformations. They should also be of the 

rectangular flap type, with glue that remains intact when subjected to hot roll pressure 

fusing used in this type of unit. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers and laser printers. We 

strongly recommend Oki transparencies (Order No. 52205701). In particular, avoid office 

transparencies designed for use by hand with marker pens. These will melt in the fuser and 

cause damage.
Labels should also be of the type recommended for use in copiers and laser printers, in 

which the base carrier page is entirely covered by labels. Other types of label stock may 

damage the printer due to the labels peeling off during the printing process. A suitable type 

is Avery White Laser Label type 5161 (Letter) or types 7162, 7664, 7666 (A4).

If you have identical paper stock loaded in another tray (2nd/3rd tray if you have one, or 

the multi purpose tray) you can have the unit switch to another tray when the current tray 

runs out of paper. When printing from Windows applications, this function is enabled in the 

driver settings. When printing from other systems, this function is enabled in the Paper 

Setup menu (See “Paper Setup” on page 30).
If fitted, tray 2 (or 3) may be removed and replenished while the machine is being fed from 

tray 1. Tray 1 cannot be removed while the machine is being fed from tray 2 (or 3) because 

parts of tray 1 are used to guide paper fed from tray 2 (or 3).

Letter

8.5 x 11 inches 

Light
17-22 lb. US Bond 
64-82 g/m²
Medium
24-28 lb. US Bond 
83-105 g/m²
Heavy
29-32 lb. US Bond 
106-128 g/m²
Ultra Heavy
35-53 lb. US Bond 
129-200 g/m²
Note: 
Tray 1 supports up to 32 lb. 
US Bond (120 g/m²).
> 47 lb. US Bond (176 g/
m²) - MP Tray only.

Legal 13in.

8.5 x 13 inches

Legal 13.5in.

8.5 x 13.5 inches

Legal 14in.

8.5 x 14 inches

Tabloid

11 x 17 inches

Executive

7.25 x 10.5 inches

A6

105 x 148 mm

A5 (Tray 1 only)

148 x 210 mm

B5

182 x 257 mm

A4

210 x 297 mm

B4

250 x 353 mm

A3

420 x 297 mm