Справочник Пользователя для Invacare JLS5

Removing the Swivel Bar/Cradle Attachment

NOTE: For this procedure, refer to FIGURE 1.

1. Remove the side rubber caps.

NOTE: Support the swivel bar or cradle attachment from underneath while removing the attaching hardware.

2. Remove the socket head screw, washer, bushings, top rubber cap, nylon spacers, washer and nut

that attach the swivel bar or cradle attachment to the boom.

NOTE: When the attaching hardware is removed, the pin, washer and o‐ring will become loose.

NOTE: Save the socket screw, small steel washer and locknut to secure the Jasmine Scale to the boom.

NOTE: Save the remaining hardware for future use of the swivel bar or cradle attachment without the scale.

FIGURE 1 Removing the Swivel Bar/Cradle Attachment

Top Rubber Cap

Side Rubber Cap

Nut

Washer

Nylon Spacer

Side Rubber Cap

Socket Head Screw

Washer

Bushing

Swivel Bar

Bottom Rubber Cap

O-ring

Washer

Optional Cradle

Attachment

Bushing