Справочник Пользователя для Mellerware 20550

PREPARATIONS BEFORE USE:

• Insert the Lithium battery (included) in the

underside of the scale. (Note: Make sure the
battery is pushed all the way into the space
provided. Also, make sure the “+” side of the
battery is facing out)

• Select the unit of measure you use (kg, lb, st)

on the underside of the scale.

OPERATION

Control Function

1. Key: UP
2. Key: “set”
a.

Turns the scale on

Enter into a parameter setting

Confirm the data

3. Key: DOWN

Personal Weight

1. Scale setup: Place the scale on a hard flat

surface. To turn the scale on, gently tap the
glass platform of the scale with your foot, or
press the “set” key. Then the scale displays

,
and then the digital weight measurement will

turn to 0,0. This indicates that the scale has
been setup correctly.

a. Note: This “Scale setup” procedure needs to

be performed each time you use the scale.

b. Note: If you step on the platform before “0,0”

appears, you will not obtain a reading. If this
happens, step off the scale, then wait for the
display to turn off and follow the above steps
to setup the scale.

2. To measure your weight, simply stand with

both feet in the centre of the scale’s glass
platform. Be sure to stand upright and
remain still. Then the display will show your
weight and it will flash about 2 seconds. This
indicates your actual weight. If you step off
the scale, the display will turn to “0,0”, ready
for further weighing and will shut off after 15
seconds if no further action is taken.

3. It will not save the date after shutting off.

4. When the scale is overloaded, the display

shows “Err”, and shuts off.

Measure water, fat, bones, and muscle rate

In order to measure these factors you need

to setup your personal settings such as your
unique setting profile number (P0 – P9),
gender, age, and height settings.

Personal Setting
1. For the BodyMax Health scale to remember

your settings, you need to choose a unique
number for your profile. (P0 – P9)

2. Turn on the scale as mentioned above, and it

will show “0,0”.

3. Press the “set” key, then “P0” will flash for the

first time.

4. Press the “UP” or “DOWN” key to select your

preferred profile number. (P0 – P9)

5. Press the “set” key to confirm your profile

number selection.

Gender Setting
1. Press the “UP” or “DOWN” key to select MALE

or FEMALE, then press “set” to confirm.

Age Setting
1. Press “UP” or “DOWN” key to select your age

from 10 to 99, and then press “set” to confirm.

Height Setting
1. Press the “UP” or “DOWN” key to select your

height from 60 to 240cm, and press “set” to
confirm.

Stand with your bare feet in the centre of the

glass platform, be sure to stand upright and
remain still. Your skin needs to be touching

MW_20550_bodymax_IM.indd 4

12/14/2009 10:04:52 AM