Справочник Пользователя для John Deere T670

Copyright © 2014 Deere & Company. All Rights Reserved. THIS MATERIAL IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND OR REPRODUCTION NOT 

SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations, and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to 

HXE62633 (08SEP14)

READ SAFETY INFORMATION IN 
OPERATOR’S MANUAL
Always follow all safety procedures posted 

on the machine and in the Operator’s 

Manual. Before carrying out any 

inspection or cleaning, always shut OFF 

engine, set parking brake, and remove key.

IMPORTANT: 

Thoroughly clean the 

machine from top to bottom with 

compressed air. First clean all areas 

accessible from engine deck.  

Start with cleaning cooling package. 

Restart engine after cleaning cooling 

package area. Run engine briefly at high 

idle to clear dislodged crop debris from 

cooling package area. Shut OFF engine 

and remove key. Continue cleaning in 

engine compartment. Blow crop debris 

out towards left side of machine.  

Work outwards and counterclockwise to 

other areas around engine compartment 

and rear deck. Thoroughly clean around 

turbocharger and exhaust manifold areas 

on engine. Thoroughly clean outside area 

around Exhaust Aftertreatment Enclosure 

(if equipped.) Open top access door 

on Exhaust Aftertreatment Enclosure. 

Thoroughly clean inside of enclosure, 

around the sensor locations, band clamps, 

and outer surfaces of canister. Once top 

rear areas around engine compartment, 

Exhaust Aftertreatment Enclosure, and 

rear deck are clean proceed to clean 

remaining areas accessible from ground 
level.

• 

Left side of feeder house, on reverser 
gearcase (6).

• 

Left side of frame, behind tailings 
elevator (7).

• 

Area behind Battery Box (8).

• 

Below rear straw walker shaft (9).