Справочник Пользователя для Motorola G24
Phone and Date Books and Clock
3-86
AT Commands Reference Manual
December 31, 2007
OK
AT+CPBW=,"035658027",129,"Phone7"
OK
AT+CPBW=,"035658028",129,"Phone8"
OK
AT+CPBW=,"035658029",129,"Phone9"
OK
AT+CPBW=,"035658030",129,"Phone10"
OK
AT+MPDPM?
+MPDPM: 2
OK
Directory Access Commands - Date Book
+MALARM, Date Book Reminder Unsolicited Report
This unsolicited event is sent to the terminal indicating a date book reminder is activated.
Note:
The date book reminder is accompanied by alert. The alert is not programmable. The
configuration of all date book reminders set by +MDBGD command and the date book
reminder's duration was defined by <Duration> parameter of +MDBW command. If
multiple date book reminders are set to go off at the same time, they will come up in
sequence i.e. after one date book reminder is exited, the next date book reminder will
come up. The date book reminder can be stopped in two ways, inserting +MALMH
command or <Duration> parameter is expired. When date book reminder has to wakeup
while any call is running, it will pass to delay mode until the call will end and afterward
it is activated. When incoming any call while date book reminder is activate, the incoming
call is stopping the date book reminder and is connecting. The date book reminder is none
basic and is not supported in UART2 mode.
configuration of all date book reminders set by +MDBGD command and the date book
reminder's duration was defined by <Duration> parameter of +MDBW command. If
multiple date book reminders are set to go off at the same time, they will come up in
sequence i.e. after one date book reminder is exited, the next date book reminder will
come up. The date book reminder can be stopped in two ways, inserting +MALMH
command or <Duration> parameter is expired. When date book reminder has to wakeup
while any call is running, it will pass to delay mode until the call will end and afterward
it is activated. When incoming any call while date book reminder is activate, the incoming
call is stopping the date book reminder and is connecting. The date book reminder is none
basic and is not supported in UART2 mode.
Syntax
+MALARM:<Index>,"<Date>,<Time>","<Title>",<Duration>,<Repeat>
The following table shows the +MALARM parameters.
Table 3-45: +MALARM Parameters
<Parameter>
Description
<Index>
Index for a given date book entry.
<Date>
Date format: YY/MM/DD, according to the character
set as specified by command +CCLK.
set as specified by command +CCLK.
<Time >
Time format: HH:MM, according to the character set as
specified by command +CCLK.
specified by command +CCLK.
<Title>
Title identifier for a date book entry, according to the
character set as specified by command +CSCS.
character set as specified by command +CSCS.