Справочник Пользователя для Motorola G24
Email
3-162
AT Commands Reference Manual
December 31, 2007
+MEMR, Read Email Message
This AT command is used to display an email message chosen by its <message_id>. <status> of
each message is changed to read status after the message is read for the first time.
each message is changed to read status after the message is read for the first time.
The following table shows the +MEMR parameters.
Command
Type
Syntax
Response/Action
Remarks
Set
AT+MEMR=<message_id>
+MEMR:<status>,<priorit
y><from>,<to>,<cc>,<bcc
>,<subject>,<date>,<body
>,<name_of_attachments>
>,<subject>,<date>,<body
>,<name_of_attachments>
OK
or:
+CME ERROR: <err>
Table 3-97: +MEMR Parameters
<Parameter>
Description
<message_id>
The identity number of the current message.
<status>
Status of the message (can be a combination of statuses).
Example:
0 = READ
1 = SENT
2 = UN-READ
3 = UN-SENT
0 = READ
1 = SENT
2 = UN-READ
3 = UN-SENT
<from>
Original message address.
<to>
Addresses of intended recipients of current email message. The maximum length of
this parameter is 500 characters.
this parameter is 500 characters.
<cc>
Addresses of intended copy recipients of current email message. The maximum
length of this parameter is 500 characters.
length of this parameter is 500 characters.
<status>
(decimal)
Description
0
READ
1
SENT
2
UN-(read/sent)
4
Reserved
8
Reserved
16
Reserved
32
Reserved
64
Reserved
128
Reserved