Справочник Пользователя для Motorola MC65
7 - 10 MC65 User Guide
13.
Select the serial device in the list and then tap Next.
14.
Select a COM port from the drop-down list.
15.
Tap Finish.
ActiveSync Using Bluetooth
Use the wireless Bluetooth serial port connection for ActiveSync similar to a physical USB cable connection.
Configure the application that will use the connection to the correct serial port.
Configure the application that will use the connection to the correct serial port.
To set up a Bluetooth ActiveSync connection:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 32.8 feet (10 meters) of one another.
3.
On the computer, click Start > Settings > Control Panel.
4.
Double-click Bluetooth Devices.
5.
On the Options tab, select the Turn discovery on and Allow Bluetooth devices to connect to this
computer checkboxes.
computer checkboxes.
Figure 7-7
Computer Bluetooth Devices Window
6.
On the COM Ports tab, click Add.
NOTE
No connection is made at this point. An application must open the selected COM port to trigger Microsoft
Bluetooth stack to open the connection.
Bluetooth stack to open the connection.
NOTE
For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS
adapter) before connecting to the computer to pass though to the Internet or a network. For more information
on network bridging, see Windows Help on your computer.
adapter) before connecting to the computer to pass though to the Internet or a network. For more information
on network bridging, see Windows Help on your computer.
The instructions below are for computers that support the Windows XP SP2 or later version operating system.