Справочник Пользователя для Motorola MC65
9 - 20 MC65 User Guide
2.
Tap .
3.
After the beep, say the music file name. For example: Drive.
4.
After the second beep, repeat it.
5.
Voice Commander builds the recorded voice tag.
6.
Voice Commander plays back the recorded voice tag to confirm the voice tag has been created successfully,
and
appears to the right of the music file name.
Digit Trainer Settings
The user can improve the Voice Commander digit dialing success by performing the Digit Trainer sequence:
1.
Tap .
2.
Start reading first string after hearing a beep. When finished, the system plays back the recorded voice and ask
for confirmation.
for confirmation.
3.
If the utterance is correct and clear, tap Yes. The system moves into next digit string for recording.
If the utterance is incorrect, tap No. The system stays at the current string for re-recording.
4.
Repeat steps 1 through 3 for the remainder of the strings (at any time, tap Cancel to stop.)
5.
After finishing the recording of 10 digit strings, tap Done to confirm the adapted model or tap Remove All to
delete the adapted model and re-train.
delete the adapted model and re-train.
Digit Setting Settings
Use the Digit Setting tab to set valid phone number lengths to improve digit recognition accuracy. The user can
change the default settings based on the local telecom requirement. The user can also select No constraint
checkbox to disable this limitation, though with the trade off of increased errors caused by surrounding noises.
change the default settings based on the local telecom requirement. The user can also select No constraint
checkbox to disable this limitation, though with the trade off of increased errors caused by surrounding noises.
Advanced Settings
Use the Advanced Settings tab to set the voice recognition sensitivity. Select:
•
Sensitive: makes the recognizer easier to return a recognition result, whenever there is an utterance
detected. This setting is used in environment with stationary noises, such as in a car, a bus or a factory.
detected. This setting is used in environment with stationary noises, such as in a car, a bus or a factory.
•
Normal: this setting is used in most environments.
•
Accurate: when selected, the recognizer becomes very strict in responding to user's voice commands. This is
to reduce misunderstanding calls or actions that could be triggered by unrelated voices issued by
surrounding people.
to reduce misunderstanding calls or actions that could be triggered by unrelated voices issued by
surrounding people.
NOTE
Tap
again rebuild the voice tag. Tap
to delete the voice tag.
NOTE
The maximum phone number length is 18 digits.