Справочник Пользователя для Mitel 5312

5312/5324 IP Phones User Guide

- 28 -

To turn Handsfree Answerback off:

• Press the flashing (MUTE) key once. The MUTE key light turns OFF.
• To respond to a Direct Page when Handsfree Answerback is OFF, see "Direct Page –

Handsfree Answerback Disabled" elsewhere in this guide.

Note: By default, Handsfree Answerback is turned OFF at your phone. If the

(MUTE)

key is OFF when your set is idle, Handsfree Answerback is OFF.

To answer a call using Handsfree Answerback:

Phone state before Page arrives

To answer the Direct Page

Phone is idle and MUTE is flashing

1. Check that MUTE is OFF.

2. Listen for the paging party.

3. Begin speaking.

4. Lift the handset if you wish to switch from a

Handsfree call to a handset call.

You are on a handset or headset call, and
MUTE is OFF

1. Check that MUTE is flashing.

2. Press

MUTE. The light turns ON solid, and you

are now speaking to the paging party and have
muted your handset/headset call.

3. Speak to the paging party. Press MUTE to

alternate between handset/headset and
handsfree calls.

You are on a MUTED handset/headset
call, OR, you are on a Handsfree call

The party paging you receives a busy tone.
Handsfree Answerback does not interrupt your call.

To end a Handsfree Answerback call:

• Press

either (SPEAKER) or

(CANCEL).

Note : When the Handsfree Direct Page call ends, the MUTE key light returns to the

state it was in before the call was established.

Direct Paging - Handsfree Answerback Disabled

Your administrator enables or disables Handsfree Answerback and you can also turn it on or
off on your phone.

To turn Handsfree Answerback off, see Direct Paging - Handsfree Answerback Enabled in
this guide. When Handsfree Answerback is disabled on your phone and you receive a Direct
Page, the Direct Page is indicated by a single burst of tone.