Справочник Пользователя для Panasonic II

 

PROCEDURE OF PAIRING TO THE MOBILE PHONE 
(Not possible while charging the SuperTooth II) 

 

Pairing will mate a link or connection between the two Bluetooth devices, SuperTooth II 
and your phone. 

1.  This kit supports either Handsfree or Headset pairing. 

First, refer to the Compatibility Table for suggested pairing modes to be able to 
determine what pairing mode is best for your phone. 
When you are certain of what pairing mode to use, proceed with the instructions. 
Note: Handsfree and Headset pairing procedure are separated. 
 

HANDSFREE pairing: 
2.  Bring the mobile phone at about 20cm from SuperTooth II. 

 

3.  The SuperTooth II is initially off. Turn it on by flipping 

up the Swivel Arm(1) to 55° position. The Bluetooth 
Indicator(9) will glow (blue blink). 

 
 
 
 

4.  Simultaneously press the Reject Button(2) and Pick-

Up/Hang-Up Button(7) for about 10 seconds. A 
distinctive tone will be heard and the Bluetooth indicator 
LED will change from blinking blue to alternate blinking 
red and blue. SuperTooth II is now In Handsfree Pairing 
Mode. 

 
 
5.  While the kit is in pairing mode, access the Bluetooth menu of your phone. (Kindly 

refer to your phone's manual.) Turn on its Bluetooth function then execute a 
Bluetooth search so that it will be able to search and find your SuperTooth II. 
When the phone displays the list of the Bluetooth devices it found, select the 
name of this kit (SuperTooth II). 

6.  When the phone asks for a passcode, enter “0000”. 
7.  Pairing is successful if the alternating red/blue lights of Bluetooth Indicator(9) 

will stop and then change to plain blinking blue. Normally, (the phone would also 
show briefly on its display if it's already paired and connected to SuperTooth II or 
if pairing with it failed. 

 
Note:  If pairing failed, repeat the procedure. 
If pairing succeeded, then your SuperTooth II kit is now ready to use. 
You can now make or answer a call using your kit instead of your phone.