Руководство Пользователя для Panasonic 700

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-61

(CPC-AII and CPC-B Version 2.0 or higher)

When a DSS/BLF key is programmed, it automatically provides direct station 
selection and busy lamp field for the assigned extension number. If desired, 
the DSS/BLF key can also provide ring monitor. 

For example, you can set extension A as a DSS/BLF key on extension B. 
When extension A rings, the LED of the DSS/BLF key on extension B 
flashes. If extension B answers the call by pressing the DSS/BLF key, the 
LED on extension A goes off and the call remains only on the DSS/BLF key 
of extension B.

Ringing can be set on either one or both extensions. If the extensions are not 
set for ringing, the LED of the DSS/BLF key will flash red. If the extensions 
are set for ringing, the LED will flash green.

When extension A is in use, the LED of the DSS/BLF key on extension B will 
light red. If one extension has the Absence Message, Call Forwarding, or Do-
Not-Disturb feature activated, the DSS/BLF key will light green.

1. Press 

the 

PROG key.

2.  Press the FF key you want to assign the DSS/BLF appearance to.

3.  Dial the extension number.

4. Press 

the 

HOLD key.

Press the idle DSS/BLF key.

Press the flashing DSS/BLF key.