Руководство Пользователя для Panasonic 700

Appendix I. CPC-EX 2.3 Feature Update

Section 700-Operation

Page I-16

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

6. When Password> is displayed, type the 4-digit remote or private 

password.

7.  After the DBS responds with REMT>, type P and then press Enter.

8.  Follow the directions on the screen to access the desired program. (See 

“Terminal Programming Commands”.)

The previous versions did not allow the programming flexibility to 
accommodate certain central office ISDN configurations. This enhancement 
allows the flexibility in programming to set the DBS parameters to match 
certain central office provisioning.

See Section 400 - Programming (Appendix K) for more detailed 
programming information.

N/A

UNLESS STATED ALL OTHER DEFAULT VALUES ARE CORRECT.

• CO Type (0)  4ESS

• NSF- None (0) or MegaCom (2) - Depends on service requested from CO.

• ISDN International Code Deduct    0 1 1

- 

Set to (1) to deduct  0 1 1   from the CO Setup message.

• ISDN Long Distance  1  Code Deduction

• Set to (1) to deduct  1  from the CO Setup message.