Справочник Пользователя для Smooth Fitness 9.65LC
www.smoothfitness.com
29
MAINTAINENCE
HOW TO MAINTAIN YOUR TREADMILL
:
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance could
cause damage or shorten the life of your treadmill and VOID the LIMITED WARRANTY coverage.
•
Important: DO NOT use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids
away and keep it out of direct sunlight.
away and keep it out of direct sunlight.
•
Inspect and tighten all parts of the treadmill regularly. Replace any damaged or worn parts immediately.
BELT ADJUSTMENT:
The running belt has been properly adjusted at the factory. However transportation, uneven flooring or other
unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end
caps and possibly causing damage. To adjust the belt back to it’s proper position please follow the directions below:
unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end
caps and possibly causing damage. To adjust the belt back to it’s proper position please follow the directions below:
1. If your belt tends to move to the right, rotate the right tension bolt clockwise. We recommend an adjustments
of 1/4 turn at a time. Then run the treadmill at 3 mph for 5 minutes . If your belt continues to walk to the right,
simply adjust the left belt tension bolt by turning it 1/4 turn counterclockwise, Then run the treadmill at 3 mph
for 5 minutes .Repeat until the belt is centered..
simply adjust the left belt tension bolt by turning it 1/4 turn counterclockwise, Then run the treadmill at 3 mph
for 5 minutes .Repeat until the belt is centered..
2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time. Then run the
treadmill at 3 mph for 5 minutes. If the belt continues to walk to the left, simply adjust the right tension bolt
counterclockwise. Then run the treadmill at 3 mph for 5 minutes .Repeat until the belt is centered..
counterclockwise. Then run the treadmill at 3 mph for 5 minutes .Repeat until the belt is centered..
3. If your belt is slipping, simply tighten both left and right bolts evenly 1/4 turn. Repeat the process if necessary.
DO NOT over tighten the walking belt.,
Right and left tension bolts are located at the rear of the treadmill.
DECK LUBRICATION:
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be
checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be
lubricated usually within 3 months.
Smooth Fitness recommends lubricating the walking deck every 3 months
Please visit
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be
checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be
lubricated usually within 3 months.
Smooth Fitness recommends lubricating the walking deck every 3 months
Please visit