Справочник Пользователя для Mitsubishi Electronics 00UCPU
78
(b) Universal model QCPU
Settings of parameters in double-lined squares, except some parameters, must be the same in all the CPU
modules used in a multiple CPU system. (
*1
Universal model QCPUs do not support the online change function, but the setting is required to replace modules
controlled by the Process CPU on the same base unit online.
controlled by the Process CPU on the same base unit online.
Multiple CPU Setting
Operation Mode
Multiple CPU Synchronous Startup Setting
Online Module Change
*1
Start
PLC Side Device
Advanced Setting
Use Multiple CPU High Speed
Transmission
Transmission
CPU Specific Send Range
CPU Specific Send Range
Refresh Setting
Auto Refresh
Points
I/O Sharing When Using Multiple CPUs
System Area
Multiple CPU High Speed Transmission
Area Setting
Area Setting
Host Station
I/O Assignment
I/O Assignment
Basic Setting
Slots
PLC System
Points Occupied by Empty Slot
No. of PLC
Detailed Setting: Control PLC
: Setting required
: Same setting required for all CPU modules
: Individual setting allowed for each CPU module
: Same setting required for all CPU modules
: Individual setting allowed for each CPU module