Справочник Пользователя для Suunto None
Table 4.1. Locked bearing symbols
Explanation
Symbol
You are traveling towards the locked bearing
You are 90 (or 270) degrees from the locked bearing
You are 180 degrees from the locked bearing
You are 120 (or 240) degrees from the locked bearing
4.3.3. Compass settings
You can define the compass settings ( calibration, declination and time-out) when in
COMPASS mode:
You can define the compass settings ( calibration, declination and time-out) when in
COMPASS mode:
Calibration
Because of changes in the surrounding magnetic field, the Suunto Cobra3 electronic
compass occasionally needs to be re-calibrated. During the calibration process, the
compass adjusts itself to the surrounding magnetic field and to tilting. As a basic rule, you
should calibrate the compass whenever it doesn’t seem to operate properly, or after
replacing the dive computer's battery.
First the compass is level calibrated and after a successful level calibration, the compass
is tilt calibrated. The tilt calibration compensates for tilting the compass in any direction in
angles of up to 45°.
Strong electromagnetic fields, such as power lines, stereo speakers, and magnets can
affect the compass calibration. It is therefore advisable to calibrate the compass if your
Suunto Cobra3 has been exposed to these fields.
Because of changes in the surrounding magnetic field, the Suunto Cobra3 electronic
compass occasionally needs to be re-calibrated. During the calibration process, the
compass adjusts itself to the surrounding magnetic field and to tilting. As a basic rule, you
should calibrate the compass whenever it doesn’t seem to operate properly, or after
replacing the dive computer's battery.
First the compass is level calibrated and after a successful level calibration, the compass
is tilt calibrated. The tilt calibration compensates for tilting the compass in any direction in
angles of up to 45°.
Strong electromagnetic fields, such as power lines, stereo speakers, and magnets can
affect the compass calibration. It is therefore advisable to calibrate the compass if your
Suunto Cobra3 has been exposed to these fields.
NOTE
When traveling overseas, it is recommended that you recalibrate the
compass at the new location before using it.
compass at the new location before using it.
NOTE
Remember to hold the Suunto Cobra3 level during the level calibration
process. A deviation of ± 5° is allowed in any direction from the
horizontal plane during level calibration.
process. A deviation of ± 5° is allowed in any direction from the
horizontal plane during level calibration.
To calibrate the compass:
14