Справочник Пользователя для Suunto D3
45
4.5. DIVE ALARM SETTINGS
[DIVE AL]
[DIVE AL]
You can set one depth alarm in the D3. When the
depth alarm activates, the
depth alarm activates, the
-symbol blinks as long
as the present depth value exceeds the adjusted value
and the alarm sounds for 24 seconds. Press any but-
ton to stop the audible alarm, after it has activated.
and the alarm sounds for 24 seconds. Press any but-
ton to stop the audible alarm, after it has activated.
To set the depth alarm:
1. In the Setting Mode [SET], press S fi ve (5) times
to select the Dive Alarm Setting Mode (Fig. 4.13.).
to select the Dive Alarm Setting Mode (Fig. 4.13.).
2. Wait two seconds until the Dive Alarm Setting
Mode activates automatically. The alarm status [On/
OFF] starts to blink on the display (Fig. 4.14.).
Mode activates automatically. The alarm status [On/
OFF] starts to blink on the display (Fig. 4.14.).
3. Press S to change the selection in the following
sequence.
sequence.
->On/OFF status -> depth alarm limit -> dive time
alarm minutes (-> dive time alarm seconds)
alarm minutes (-> dive time alarm seconds)
4. While the alarm status [On/OFF] is selected
(blinking), press + or - to change the status. When
the alarm status is On, the depth alarm indicator
( -symbol) in the bottom right corner of the display
indicates that the alarm is on.
(blinking), press + or - to change the status. When
the alarm status is On, the depth alarm indicator
( -symbol) in the bottom right corner of the display
indicates that the alarm is on.
FR
E
E
A
C S
Fig. 4.13. Dive Alarm Setting
Mode.
Mode.
FR
E
E
A
C S
MAX
DIVE TIME
m
Fig. 4.14. Dive Time Alarm.
Center window displays less
than 5 minutes dive time.
Center window displays less
than 5 minutes dive time.