Справочник Пользователя для Suunto D3
65
BATTERY REPLACEMENT
The battery is located in a separate battery com-partment on the back side of the
instrument (Fig. 6.1.). To change the battery, follow the procedure below:
1. Thoroughly rinse and dry the computer.
2. Open the battery compartment lid by carefully but fi rmly turning it counter-
clockwise using a coin or a screwdriver. When turned the lid should rise from the
compartment. Care should be taken not to damage any of the parts. Use a large
enough coin/screwdriver in order not to damage the lid.
3. Remove the battery compartment lid with your fi ngers. Do not use sharp metal
objects as they might damage the O-ring or the sealing surfaces.
4. Carefully remove the battery from underneath the battery retainer/contact.
The battery can be removed by inserting a screwdriver under the battery and
moving the battery with your fi nger. Be careful not to damage the electrical
contacts or the sealing surface.
Check for any traces of fl ooding or other damage. In case of a leak or any other
damage, bring the dive computer to an authorized SUUNTO dealer or distributor
for check and repair.
5. Remove the old O-ring from the battery compartment lid.
6. Check the condition of the old O-ring; a defective O-ring may indicate sealing
or other problems. Dispose the old O-ring and battery compartment lid, even if
they seem to be in good condition.
The battery is located in a separate battery com-partment on the back side of the
instrument (Fig. 6.1.). To change the battery, follow the procedure below:
1. Thoroughly rinse and dry the computer.
2. Open the battery compartment lid by carefully but fi rmly turning it counter-
clockwise using a coin or a screwdriver. When turned the lid should rise from the
compartment. Care should be taken not to damage any of the parts. Use a large
enough coin/screwdriver in order not to damage the lid.
3. Remove the battery compartment lid with your fi ngers. Do not use sharp metal
objects as they might damage the O-ring or the sealing surfaces.
4. Carefully remove the battery from underneath the battery retainer/contact.
The battery can be removed by inserting a screwdriver under the battery and
moving the battery with your fi nger. Be careful not to damage the electrical
contacts or the sealing surface.
Check for any traces of fl ooding or other damage. In case of a leak or any other
damage, bring the dive computer to an authorized SUUNTO dealer or distributor
for check and repair.
5. Remove the old O-ring from the battery compartment lid.
6. Check the condition of the old O-ring; a defective O-ring may indicate sealing
or other problems. Dispose the old O-ring and battery compartment lid, even if
they seem to be in good condition.