Справочник Пользователя для Impex WMGG-20
COMPUTER
Press “MODE” key to view Count, Time, Calories, Strides/Min and Scan.
Press “RESET” key to set all values back to zero.
DISPLAY:
Count
Display counts of strides.
Time
Display the elapsed time (Minute : Second).
Calories
Display the calorie consumption.
Strides/Min.
Display number of strides per minute.
Scan Automatically scans each function in sequence.
REPLACE BATTERY:
REPLACE BATTERY:
1. Remove the battery cover on the back of the computer.
2. Replace one 1.5V (AA) battery.
3. Make sure the battery is installed correctly and the polarities are correct.
4. If the display is not clear or only partial segments appeared, remove the battery and
2. Replace one 1.5V (AA) battery.
3. Make sure the battery is installed correctly and the polarities are correct.
4. If the display is not clear or only partial segments appeared, remove the battery and
wait for 15 seconds before re-install it.
5. The battery life is approx. 3 months under normal usage.
6. When the battery is removed, all the functional values will reset to zero.
Note:
Please note all values on this computer are approximate and they are for
comparison purpose only. Do not use these values for any medical or
rehabilitation purpose.
6. When the battery is removed, all the functional values will reset to zero.
Note:
Please note all values on this computer are approximate and they are for
comparison purpose only. Do not use these values for any medical or
rehabilitation purpose.
8