Справочник Пользователя для Sanus Systems AFV48B

Place the Middle Shelf (I) on the 9” Pillars (G). A Shelf Connector (A) should be protruding above the Middle Shelf at each 
corner.

Place two Top Bolts (B) through the Middle Shelf (I) and thread them into both middle 9” Pillars (G) as shown in Diagram 4.

Using the Allen Key (L), tighten both Top Bolts (B).

Thread and hand tighten a 7” Pillar (F) onto each exposed Shelf connector (A).

Press a Grommet (D) into each wire management hole in the Bottom and Middle Shelf (I) as shown in Diagram 5.