Справочник Пользователя для Black Box 4 x 4 HDMI Matrix Switch

724-746-5500 | blackbox.com

Page 11

Chapter 2: Overview

Table 2-1 (Continued). Front-panel components.

Number

Component

Description

Function Key — OFF

Disables (mutes) video to selected channels.
• Press the OFF button followed by any destination channel.
• Press button 1 through 4 to select the output destination. The display will show “0” for the selected channel indicating no video

selected.

Function Key — RECALL
(preview)

The system will show previously stored presets, up to a total of 16. Presets are stored in local memory using Source keys 1
through 4 or Destination keys 1 through 4 as the memory preset location.
• Press the RECALL button.
• Press 1 through 4 on either Source or Destination row.

• Press ENTER. The preset configuration will execute. Operation completes.

NOTE: Operation will abort if no keys are pressed within 5 seconds.

Function Key—Enter (or
DEMO)

Press ENTER to confirm entries.

Function Key—Memory
(or SAVE)

The system will store presets, up to a total of 8. Presets are stored in local memory using Source keys 1 through 4 or
Destination keys 1 through 4 as the memory preset location.
• Configure desired matrices.
• Press the memory button.
• Press 1 through 4 on either Source or Destination row.
• Press ENTER to ready memory location.
• Or press MEMORY again to cancel operation.
Operation completes.

NOTE: Operation will abort if no keys are pressed within 5 seconds.

Function Key — LOCK

• Press and hold the LOCK button for two seconds to lock out the front panel.
• Press and hold the LOCK button for two seconds to re-enable the front panel.

Function Key — EDID

Press EDID to select new EDID mode and select source button #1 or #2 to change embedded EDID mode.

19" rackmount ears

Converts a desktop switch to a 19-inch rackmount switch. Brackets are included.

2.4.2 Rear Panel

3 2 1

Figure 2-3. Rear panel.