Справочник Пользователя для Black Box 4 x 4 HDMI Matrix Switch
![Black Box](https://files.manualsbrain.com/attachments/93f582e81b91156050f0dfb0bd85a42bc8635e07/common/fit/150/50/2f54d4d876583e31f45c92e398ef3997c2dece9a115125c2fd1224ff9c81/brand_logo.png)
724-746-5500 | blackbox.com
Page 20
724-746-5500 | blackbox.com
Chapter 5: RS-232 Serial Interface
5. RS-232 Serial Interface
5.1 Connect a PC or Control System
For a complete list of commands, refer to the extended RS-232 Protocol Instruction Manual.
Figure 5-1. RS-232 DB9 connector.
Table 5-1. RS-232 serial interface pinouts.
Pin
RS-232
Defintion
1
----
Not used
2
TX
Transmitter
3
RX
Receiver
4
----
Not used
5
GND
Ground
6
----
Not used
7
----
Not used
8
-----
Not used
9
----
Not used
5.2 RS-232 Protocol Commands
You can control the switch via the RS-232 serial control port to interface to a PC or similar third-party control system.
The serial communication parameters are 9600 baud, 8 bit, No Parity, and 1 stop bit. This is often referred to as 9600 8N1. When the unit
recognizes a complete command, it will perform the requested action. There is no delimiter character required.
recognizes a complete command, it will perform the requested action. There is no delimiter character required.
0 = Enter the number
O = Enter the letter
NOTE: Make sure you use the correct keys for letter “O” and number “0.”