Справочник Пользователя для Kodak VERSION 4.0

K O D A K   D i s p l a y   M a n a g e r   S y s t e m   V 4 . 0   U s e r ’ s   G u i d e  

   

2 1

Before you begin to calibrate, make sure that you:

•

Prepare the monitor and viewing environment

•

Setup the system options for calibration, sensors, tolerances, display, 

timing, and directories

•

Load specific settings, if previously saved

You do not need to setup the system options each time you calibrate. When the 
system opens, it automatically loads the settings that you save in the kdm.ini 
file. Or you can create and load a customized .ini file. See 

•

Let the CRT monitor warm up for at least one hour. LCD monitors take 10 

to 15 minutes to warm up. 

•

Set your power save mode to Never.

•

Disable your screen saver.

•

Set your screen resolution to at least 1280 x 1024.

•

Dim the room lights or cover the screen with a dark cloth. There should be 

no light shining on the screen or on objects that might reflect on the 
screen.

•

Set the monitor in Expert mode, if available. 
a) From the panel at the front of the monitor, select COLOR. 

b) Use the left and right arrow buttons on the panel to highlight the 

Expert tab, where you see the bias and gain settings. 

For some monitors, the Expert mode is already selected as the default.

•

If you have a newer SONY monitor that has a Picture effect button on the 

panel at the front of the monitor, press this repeatedly until the message 
DYNAMIC appears on screen.

•

Set the monitor color quality to the highest possible value (at least 16 bits). 

•

If your display supports Super Bright mode, turn off the Super Bright mode 

by repeatedly pressing the SB button on the front of the monitor until the 
screen reads “Super Bright Mode Off”.