Справочник Пользователя для Kodak VERSION 4.0

7 6

     

K O D A K   D i s p l a y   M a n a g e r   S y s t e m   V 4 . 0   U s e r ’ s   G u i d e

If you get a message that the sensor failed to initialize:

•

Go  to  Options > Setup. From the Sensor tab, make sure that you 

selected the appropriate sensor and connection type. 

•

Check the connection. 

•

Make sure that the USB or serial port is live and functional.

•

It is possible that your USB hub is not compatible with the sensor. Connect 

the sensor directly to the computer to verify. 

•

If you are using WINDOWS 2000 and have unplugged the sensor, you 

must restart your computer.

•

If you extended the length of the cable, make sure that you have used no 

more than five repeaters. Repeaters can be placed every 5 meters 
(16.4 feet) for a total length of 30 meters (98.4 feet). Instead of using 
repeaters, use a Port Authority Device and extension cable.

•

(WINDOWS only) Check your hardware devices. 

 

From the WINDOWS Start button, click Settings > Control Panel > 
System > General tab > Device Manager. Make sure the sensor is 
installed and does not have an orange flag next to its name in the 
directory. If so, reinstall the software from the installation CD. Your license 
key will continue to work if you reinstall the software.

•

If your WINDOWS system cannot locate the drivers, go to:
C:\Program Files\Kodak\KODAK Display Manager System\
SequelDrivers

OR

This can happen with a LINUX or WINDOWS system when you restart your 
computer and the device is connected. 

With your computer running, unplug the device and plug it back in.