Справочник Пользователя для Archos 604

504/604

MANUAL

V2.2

CoMPUTER CoNNECTIoN > p. 36

6. COMPuTer COnneCTIOn

6.1 ‘wIndOws MedIa deVICe’ Or ‘PC hard drIVe’

There are two connection modes for your ARCHoS device to connect to your com-

puter. When your ARCHoS device is turned on and you connect it to a computer, a

screen will pop up on the ARCHoS asking you to choose the connection mode to be

used for this connection (see Connection Steps).
The ARCHoS can be connected as a ‘Windows Media Device’ if you have Windows

Media

Player 10 (WMP10) or higher installed on your computer. otherwise, it can

connect as a ‘PC Hard Drive’.
You can change your preferred USb connection mode in the System settings screen

(see:

System Settings). This means that your preferred connection mode will be

highlighted by default when you connect your device to a computer. To access the

System Settings screen, press from the Home Screen, then select the

System icon.

6.2 COnneCTIOn sTePs

Turn on your ARCHoS device.

Plug the supplied Archos USb Cable into the ARCHoS device.

Plug the Archos USb Cable into your running computer.

Your ARCHoS device will ask you to choose the USb connection mode: using the

/ buttons, select the one that you want to use and press OK*.

Refer to the paragraphs below for details on your particular operating system.

* If you select ‘Charge only’, your device will just charge its batteries via the USb

cable. You can use it as normal. At any time, you will be able to enable the USb con-

nection by selecting the Enable USb menu item in the Home Screen.

COMPUTER

TURNED ON

USb port