Справочник Пользователя для TEAC SR-L280I-B

If  you  have  problems  with  your  system,  look  through  this 
chart and see if you can solve the problem yourself before 
calling your dealer or TEAC service center.

e Check the connection to the AC power supply. Check 

and make sure the AC source is not a switched outlet 
and that, if it is, the switch is turned on. Make sure 
there is power to the AC outlet by plugging another 
item such as a lamp or fan into the outlet.

e Select the source by pressing the FUNCTION button.
e Adjust the volume.
e If the MUTING indicator blinks on the display, press the 

MUTING button.

e The unit is too close to a TV or similar appliances. 

Install the unit apart from them, or turn them off.

e If the battery is exhausted, replace it with a new one 

(see page 14).

e Use remote control unit within the range (5 m) and 

point at the remote sensor on the front panel.

e Clear obstacles between the remote control unit and 

the main unit.

e If a strong light is near the unit, turn it off.

e Load a disc with the label side up.
e If the disc is dirty, clean the surface of the disc.
e A blank disc has been loaded. Load a prerecorded 

disc.

e Depending on the disc, etc. it may not be possible to 

play back CD-R/RW discs. Try again with another disc.

e You cannot play back unfinalized CD-R/RW discs. 

Finalize such a disc in a CD recorder and try again.

e Place the unit on a stable place to avoid vibration and 

shock.

e Do not use scratched, damaged or warped discs.

e Check the dock adapter (see page 13).
e Remove dust or obstacles from the Dock connector of 

this unit and the iPod, and insert the iPod again.

e Remove the iPod from the dock, wait a few seconds, 

and insert it again.

e Software update may solve the problem. Visit the 

Apple website and download the latest iPod Software 
(see page 13).

e Set off the HOLD switch of the iPod.

e Tune in the station properly.
e Rotate the FM or the AM antenna until you get stations 

clearly.