Справочник Пользователя для TEAC HD-P2

Located on top of the HD-P2, next to 
the data wheel are switches for con-
trolling the analog audio inputs and 
dynamics.
The input switches (

) switch 

between the XLR and RCA jack 
inputs. The 

 switches only apply to 

signals coming in the XLR jacks.
Limiting can be turned on or off and 
the 

 

 switch enables stereo 

limiting of the left & right channels.
When 

 is disabled, each 

channel has its own mono limiter.

 can be turned on to provide 48V phantom 

power to the microphone inputs.

 controls whether the left mic input is from the 

internal microphone or from the normal input source.
Turning on 

 provides a -18dB/oct, 100Hz low-

cut filter to the analog inputs.

 – Accepts standard PS/2 keyboard. An 

external keyboard is useful for quickly renaming 

files and markers as well as remotely operating the 

transport.

 – Connects the HD-P2 to a host computer via 

IEEE.1394 (Windows/Macintosh). When connected 

to a powered FireWire host the HD-P2 will auto-

matically use that for power, extending battery life.

 – Standard female XLR input for linear 

timecode.

 – Word Clock/Video Input connec-

tor: BNC (75 ohm) internal termination for 5V TTL 

word clock or 1.0Vpp composite, blackburst, or tri-

level video sync.

 – S/PDIF audio input RCA Jack.

 – S/PDIF audio output RCA Jack.

 – Standard 1/4 inch headset jack. Project set-

tings control the type of headset monitoring (stereo, 

mono).

 – RCA output jacks for analog output.

 – RCA input jacks for analog input.

 – 12VDC input jack for use with the provided AC 

adaptor.

 – XLR input jacks for either line level or mic 

level (selected by switch on top) input. A separate 

switch controls phantom power to the XLR inputs.

Compact Flash Slot – Type I/II Compact Flash slot 

(top left). Unmount Compact Flash (via menus) BE-

FORE removing card to ensure file integrity.