Справочник Пользователя для JVC DR-MV5S

Filename [MV5S_08Basic TimerDub.fm]

Masterpage:Left+

Page 36Wednesday, 2 March 2005  14:42

This function allows you to automatically record a satellite program 
which is timer-programed on your external DBS receiver. Connect 
a DBS receiver to the unit’s [S VIDEO/VIDEO/AUDIO INPUT L-1] 
connectors and program the timer on the DBS receiver. The unit 
starts or stops recording by the signals input from the DBS 
receiver. After recording, the unit’s power shuts off automatically.

● You can also connect the cable box if it has a timer.

Load a recordable disc. 

Press DVD so that the DVD lamp lights up on the unit.

Press REC MODE repeatedly to set the recording mode.

Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, 

or “S-VIDEO” for the S-VIDEO input connector, depending on the 
connector being used. (

墌 pg. 73)

Press and hold REC LINK for about 2 seconds to engage the 

Automatic Satellite Program Recording mode. “

” and “R-LK” 

appear on the front display panel.

● To disengage the Automatic Satellite Program Recording mode, 

press REC LINK.

● If the unit’s power is off, it is not possible to engage the Automatic 

Satellite Program Recording mode.

● In step 5, if “

” blinks quickly on the front display panel even though 

your DBS receiver’s power is off, Automatic Satellite Program 
Recording will not work properly with that DBS receiver*. If this is the 
case, perform “Manual Timer Programing” (

墌

pg. 32) to timer-record 

a satellite program.

● “

” blinks on the front display panel while Automatic Satellite 

Program Recording is in progress.

● For timer programing of the DBS receiver, refer to the instruction 

manual of the DBS receiver.

● Automatic Satellite Program Recording is not possible if your DBS 

receiver does not have a timer.

● Pressing the unit’s 1 button while Automatic Satellite Program 

Recording is in progress turns off the unit’s power and disengages 
the Automatic Satellite Program Recording mode.

● If there are more than one satellite programs you wish to record with 

Automatic Satellite Program Recording, it is not possible to set 
different recording modes for each program.

● Depending on the type of DBS receiver, the unit may not record a 

slight portion of the beginning of the program or may record slightly 
longer than the actual length of the program.

● If you engage the Automatic Satellite Program Recording mode when 

the DBS receiver’s power is on, the unit will not start Automatic 
Satellite Program Recording even though “

” blinks on the front 

display panel. When the DBS receiver shuts off once and is turned 
back on again, the unit starts recording.

● You can also record a program from your cable system in the same 

way if the system has a timer.

● Be sure not to turn on the DBS receiver before the program is 

executed; otherwise, the unit will start recording when the DBS 
receiver’s power is turned on.

● If you have connected another appliance other than a DBS 

receiver to the [S VIDEO/VIDEO/AUDIO INPUT L-1] connectors, 
be sure not to engage the Automatic Satellite Program Recording 
mode; otherwise, the unit will start recording when the connected 
appliance’s power is turned on.

● Automatic Satellite Program Recording and timer-recording cannot 

be done at the same time.

● Make sure the DBS receiver is connected to the unit’s [S VIDEO/

VIDEO/AUDIO INPUT L-1] connectors.

● Program the timer on the DBS receiver.

● Slide the TV/DVD switch to DVD.

MV5S_00.book  Page 36  Wednesday, March 2, 2005  2:42 PM